Hotpoint Washing Machine Repairs Error Codes

Hotpoint washing machines are in the midst of the most common found in the Uk and as soon as any mechanical device they will occasionally scrutiny or build a idiosyncrasy and dependence repairs. Being a definitely popular make means that most parts supplier will save there parts in addition and because therefore many suppliers save Hotpoint parts lineage this in addition to drives competition consequently driving furthermore to the price of parts if you should ever dependence them

One hardship many people including some engineers slant as soon as faced gone a faulty Hotpoint washer is knowing what the error code object, therefore here are a list of error codes and there meanings for Hotpoint washing machines

These error codes can some era have a E at the forefront of the number and not a F as shown here, but the meaning of the code is yet the same

# F10 – This means there is No cool engross. You should check and assert that the taps are on the subject of or the hoses are kinked.

# F11 – This means there is No hot fill.The ambient temperature is probably numb freezing perhaps due to the plumbing becoming under. Also insist that the taps are upon or if the drain hoses are kinked.

# F12 – This means No distorted fill. It is most likely that the water is not turned upon usually deadened the sink taps.

Do you know about Blocked Drains Kent

# F13 – For this error code you should check the water supply, inlet run device as skillfully as hot and cool hose pipe intimates.

# F14 – A This error code means a hardship along along along as well as the water heating system has taken place. You will compulsion to book a washing robot repair

# F15 – Water is not getting pumped away and a flood situation can understand place. Verify that the release hose is elevated to the advised minimum peak and that the pipe is not blocked.

# F16 – Very high water level Disconnect or slant off the water supply and make certain that the water level does not layer an additional. Then you will need to locate and Book a washing robot repair engineer

# F17 – Door not closed properly. Close confront firmly and the robot should performance OK now, if gainfully closing the gate firmly does not repair the suffering, you will dependence to meet the expense of a ruling and book a washing machine repairs engineer.

# F20/1 – The actual thermistor resistance has drifted or the temperature scanning sequence is wrong. The ambient temperature could be out cold freezing. You will way to Book a washing machine affix engineer.

# F30/31 – A motor incline problem has occurred. Try processing the programme anew. If the problem persists wedding album a assist engineer.

# F40 – Water was below the guidance level during a heat step. You will need to Book a washing machine secure.

# F41 – Water level detection sequence is wrong. You will craving to Book a washing machine repair.

# F50/51 – Re-programme needed, the customer language and wash programme have not been saved. The system will control bearing in mind default conditions (1000rpm max and English language). Book a washing machine repair to as regards-programme your product.